A combination ITU-T G652.D and G.657.A1 compliant fiber, This fiber offers all of the performance advantages and 30-year reliability of our standard AllWave+ Optical Fiber with the added benefit of a smaller overall diameter. Lightera has provided high quality coating materials since the advent of commercial fibers and maximizes the reliability of through the use of synthetic glass and our highly protective D-Lux® acrylate coating.
AllWave+ 200 Optical Fiber supports a minimum bend radius of 10 mm and lower bend loss than conventional G.652.D single-mode fibers. Further, the fiber has the same 9.2 micron mode field diameter as and is fully backward compatible with the installed base of G.652 single-mode fiber for seamless splicing, testing and faster network turn-up.
A combination ITU-T G652.D and G.657.A1 compliant fiber, This fiber offers all of the performance advantages and 30-year reliability of our standard AllWave+ Optical Fiber with the added benefit of a smaller overall diameter. Lightera has provided high quality coating materials since the advent of commercial fibers and maximizes the reliability of through the use of synthetic glass and our highly protective D-Lux® acrylate coating.
AllWave+ 200 Optical Fiber supports a minimum bend radius of 10 mm and lower bend loss than conventional G.652.D single-mode fibers. Further, the fiber has the same 9.2 micron mode field diameter as and is fully backward compatible with the installed base of G.652 single-mode fiber for seamless splicing, testing and faster network turn-up.
AllWave+ 200 Zero Water Peak (ZWP) Single-Mode Optical Fiber dramatically improves performance across the 1260 nm – 1625 nm spectrum. This fiber offers all the benefits of AllWave+ Optical Fiber with the added advantage of a 200 micron
coating dimension for the fiber enables smaller diameter cables.
200 µm AllWave+ Optical Fiber is being deployed across the optical network including applications such as:
A combination ITU-T G652.D and G.657.A1 compliant fiber, This fiber offers all of the performance advantages and 30-year reliability of our standard AllWave+ Optical Fiber with the added benefit of a smaller overall diameter. Lightera has provided high quality coating materials since the advent of commercial fibers and maximizes the reliability of through the use of synthetic glass and our highly protective D-Lux® acrylate coating.
AllWave+ 200 Optical Fiber supports a minimum bend radius of 10 mm and lower bend loss than conventional G.652.D single-mode fibers. Further, the fiber has the same 9.2 micron mode field diameter as and is fully backward compatible with the installed base of G.652 single-mode fiber for seamless splicing, testing and faster network turn-up.
| Product Specifications | ||
|---|---|---|
| Physical Characteristics | ||
| Clad Diameter | 125.0 ± 0.7 µm | |
| Clad Non-Circularity | ≤ 1 % | |
| Core/Clad Concentricity Error (Offset) | ≤ 0.5 μm, ≤ 0.2 μm typically | |
| Coating Diameter (Uncolored) | 190 µm ± 10 µm | |
| Coating Diameter (Colored) | 200 µm ± 10 µm | |
| Coating-Clad Concentricity Error (Offset) | ≤ 12 μm | |
| Tensile Proof Test (Other proof test levels available on request) | 100 kpsi (0.69 GPa) | |
| Coating Strip Force | Range: ≥ 0.5 N ≤8.9 N | |
| Standard Reel Lengths | 50.4 km | |
| Attenuation Uniformity / Point Discontinuities at 1310 nm and 1550 nm | ≤ 0.05 dB | |
| Chromatic Dispersion | ||
| Zero Dispersion Wavelength (λ0) | 1302 – 1322 nm | |
| Zero Dispersion Slope (S0) | ≤ 0.090 ps/nm²-km | |
| Typical Dispersion Slope | 0.087 ps/nm²-km | |
| Cable Cut-off Wavelength (λCC) | ≤ 1260 nm | |
| Group Refractive Index | ||
| at 1310 nm | 1.467 | |
| at 1550 nm | 1.468 | |
| Mode Field Diameter | ||
| at 1310 nm | 9.2 ± 0.4 µm | |
| at 1550 nm | 10.4 ± 0.5 µm (typical) | |
| Polarization Mode Dispersion (PMD)¹ | ||
| Fiber PMD Link Design Value (LDV)² | ≤ 0.06 ps/√km | |
| Maximum Individual Fiber | ≤ 0.1 ps/√km | |
| Typical Fiber LMC PMD | ≤ 0.02 ps/√km | |
| Note | ¹ As measured with low mode coupling (LMC) technique in fiber form, value may change when cabled. Check with your cable manufacturer for specific PMD limits in cable form. ² The PMD Link Design Value complies with IEC 60794-3, September 2001 (N = 20, Q = 0.01%). Details are described in IEC 61282-3 TR Ed 2, October 2006. |
|
| Optical Characteristics | ||
|---|---|---|
| Attenuation at | Maximum | Typical |
| 1310 nm | ≤ 0.34 dB/km | ≤ 0.33 dB/km |
| 1385 nm | ≤ 0.31 dB/km | ≤ 0.27 dB/km |
| 1490 nm | ≤ 0.24 dB/km | ≤ 0.21 dB/km |
| 1550 nm | ≤ 0.20 dB/km | ≤ 0.19 dB/km |
| 1625 nm | ≤ 0.24 dB/km | ≤ 0.20 dB/km |
| Attenuation vs. Wavelength | ||
|---|---|---|
| Range (nm) | Reference (nm) λ | α |
| 1285 – 1300 | 1310 | 0.03 |
| 1360 – 1480 | 1385 | 0.04 |
| 1525 – 1575 | 1550 | 0.02 |
| 1460 – 1625 | 1550 | 0.04 |
| The attenuation in a given wavelength range does not exceed the attenuation of the reference wavelength (λ) by more than the value α. | ||
| Macrobending Attenuation | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
The maximum attenuation with bending does not exceed the specified values under the following
Environmental Characteristics (at 1310, 1550 & 1625 nm)
Contact InformationFor additional information please contact your sales representative. You can also visit our website at www.lightera.com or call 1-888-FIBERHELP (1-888-342-3743) USA or 1-770-798-555 outside the USA. For a full list of our certifications, visit our website. 
Compare products and choose the best oneCompare features, sizes, models to find the perfect option for you 
This section is under construction. To view our products, please select below. | ||||||||||||
