ODF A115 BASIC MODULE (WALL MOUNT)

Composed by four main parts, sold separately:

• DIO Wall A115 – Basic Module – Responsible for accommodating and protecting the transition optic patches between the optic cable and the optic extensions (pig tails);
• Conectorized Optical Extension: each kit connects 2 fibers. Composed by optical adapters and optical extensions (pig-tails) necessary to splice with the optical cable.
• ST Expansion Kit for 36 Fibers – composed by 1 support panel for optical adapters.
• LC/SC Expansion Kit for 36 Fibers – composed by 1 support panel for optical adapters.

• Can be installed in any type of plain vertical surface;
• The basic module is provided up to 24 optical adapters and up to 36 fibers (SC/ST/FC) with an appropriated expansion kit.
• The basic module is provided up to 24 duplex adapters – 48 fibers (LC)
• The support for optical adapters, as well as areas for optical splicing and storage of excess fiber stay inside of the product, giving greater protection and safety to the system;
• It has two splicing trays fixed to the main hinged door, which facilitates the installation, as it allows the splicing tray to be in the horizontal position during the splicing process;
• Door with lock system;
• Two accesses, one in top and other down for optical cables entry. Another two accesses, top and down for optical path cords. All accesses have a rubber cover. Accesses limited at 27mm diameter;
• Guide of fibers for adequate bend radius provide optimal performance to optical fiber;
• Product protected and corrosion resistant, for the specified conditions of use in internal environments (EIA/TIA-569).

Non Aggressive