Designed specifically for indoor use, these simplex and zipcord designs with 2.25 mm outer jackets are constructed with low smoke zero halogen (LSZH) cable materials from HCS fibers. They are appropriate for indoor riser installations in enclosed or sealed locations. These cables are crimp and cleave compatible with ST or SMA connectors. LSZH materials also offer a higher operating temperature range than comparable HCS cables.
Designed specifically for indoor use, these simplex and zipcord designs with 2.25 mm outer jackets are constructed with low smoke zero halogen (LSZH) cable materials from HCS fibers. They are appropriate for indoor riser installations in enclosed or sealed locations. These cables are crimp and cleave compatible with ST or SMA connectors. LSZH materials also offer a higher operating temperature range than comparable HCS cables.
Designed specifically for indoor use, these simplex and zipcord designs with 2.25 mm outer jackets are constructed with low smoke zero halogen (LSZH) cable materials from HCS fibers. They are appropriate for indoor riser installations in enclosed or sealed locations. These cables are crimp and cleave compatible with ST or SMA connectors. LSZH materials also offer a higher operating temperature range than comparable HCS cables.
| Product Specifications | |
|---|---|
| Product Description | Zipcord 200 µm 2.5 mm LSZH HCS Fiber Optic Cable |
| Physical Characteristics | |
| Construction | Zipcord |
| Fiber Core Diameter | 200 ± 4 µm |
| Sub-Unit Diameter | 2.5 ± 0.2 mm |
| Outer Cable Diameter | 2.5 x 5.2 mm |
| Cable Weight | < 14.0 kg/km |
| Outer Jacket Material | LSZH |
| Outer Jacket Color | Orange |
| Specialty Testing (IEC 754-2 Acid Gas – Halogen Content) | Passes |
| Specialty Testing (IEC 332-3 Flammability Rating) | Passes |
| Specialty Testing (Cyclic Flexing) | > 50,000 Cycles |
| Crimp & Cleave Compatibility | SMA and ST Connectors |
| Optical Characteristics | |
| Type | Multimode Step-Index |
| Attenuation @ 850 nm | ≤ 6 dB/km |
| Mechanical and Environmental | |
| Installation Load (Maximum) | 165 lb. (734 N) |
| Operating Load (Maximum) | 85 lb. (378 N) |
| Minimum Bend Installation | 38 mm |
| Minimum Bend Operating | 25 mm |
| Operating Temperature | -20 to +80 ºC |
| Storage Temperature | -40 to +80 ºC |
| Intended Location | Indoor |
| Order by Part Number | C21051 |
| Product Description Code | HCP-M0200T-A02ZZ |
| OPTIONS | Also available in breakout construction with up to 18 sub-units, jacket color, outer jacket material, print legend, terminated assemblies |
| NOTE | The operating temperature ranges are general guidelines. Consult with our Technical Sales department to determine the optimal coating and jacketing material for your specific application. 1.860.678.6636. |
For additional information please contact your sales representative. You can also visit our website at www.lightera.com or call 1-888-FIBERHELP (1-888-342-3743) USA or 1-770-798-555 outside the USA. For a full list of our certifications, visit our website.
Lightera reserves the right to make changes to the product(s) described in this document at any time without notice. This document is for informational purposes only and is not intended to modify or supplement any Lightera warranties or specifications relating to any of its products or services.
Compare features, sizes, models to find the perfect option for you
This section is under construction. To view our products, please select below.
