Home chevron_right Products chevron_right Fiber Optic Cables chevron_right MiDia®²⁰⁰

Descontinuado

Code - 07273-01

MiDia®²⁰⁰

Loose Tube Fibre Optic Outdoor Cable 8 Element All Dielectric Dry Core Design MiDia®200

Optimized for Air-Blown Installation
Recommended duct size for optimized blowing performance: 12, 14, 16 and 20 mm Inner Diameter

Other combinations are possible, please contact us for more information. Distance achievable depends on route, equipment, and quality of duct.

Small tubes for a reduced outer diameter
Dry Core Design – Cable core water blocked by means of dry “water swellable” technology – for quicker, cleaner cable prep for jointing
Individual colored tubes

Version illustrated is the 192 Fiber Cable

Product Specification
Fiber Count	Tubes	Core Design	Outer Diameter [mm]	Cable Weight [kg/km]	Standard Length [m]	AT-Code**
24 Fibers Per Tube
96	8	1+8	8.8	70	2000 / 4000 / 6000 / 8000	AT-[][][]45CF-192
This table shows nominal diameter and weight values which may differ in shipments.
Fillers are natural colored *Please refer to the LIGHTERA AT- Code. The blanks specify the fiber type.

Identification Tube Color Code
1	Blue
2	Orange
3	Green
4	Brown
5	Grey
6	White
7	Red
8	Black

Identification Fiber Color Code
1	Blue
2	Orange
3	Green
4	Brown
5	Grey
6	White
7	Red
8	Black
9	Yellow
10	Violet
11	Rose
12	Aqua
13	Blue*
14	Orange*
15	Green*
16	Brown*
17	Grey*
18	White*
19	Red*
20	Natural
21	Yellow*
22	Violet*
23	Rose*
24	Aqua*
Note	* Black ring Alternative tube and fiber color code available on request

LIGHTERA OPTICAL CABLE MIDIA200 [ID] [MM/YYYY] [Handset Sign] xxxF [Meter Marking]

Alternative sheath printing available on request. In case of order the exact sheath printing text will be clarified with the customer.

Mechanical Properties and Environmental Behavior
Tests according to IEC 60794
	Parameter	Requirement	Value
Tensile Performance IEC 60794-1-21-E1A and E1B	Long term load	– No attenuation increase*	Load: 500 N
		– No fiber strain
	Short term load, during installation	– No changes in attenuation before versus after load	Load: 1.5 X W (W is the weight of the cable in N)
		– Max. fiber strain 0.5%
Crush Performance IEC 60794-1-21-E3A	Long term load	– No attenuation increase*	Load (Plate / Plate): 750 N
	Short term load	– No changes in attenuation before versus after load	Load (Plate / Plate): 1500 N
		– No damage**
Bending Performance IEC 60794-1-21-E11	Handling fixed installed	– No attenuation increase*	Bend radius: 140 mm
	During installation (under load)	– No changes in attenuation before versus after load	Bend radius: 280 mm
Temperature Performance IEC 60794-1-22-F1	Operation Installation Storage/Shipping	– No attenuation increase*	-40 to +70°C -15 to +40°C -40 to +70°C
* No changes in attenuation means that any changes in measurement value, either positive or negative within the uncertainty of measurement shall be ignored. The total uncertainty of measurement shall be less than of equal to 0.05 dB. ** Mechanical damage – when examined visually without magnification, there shall be no evidence of damage to the sheath. The imprint of plates will not be considered as damage.

Shipping Information
Cable Length	Drum Diameter	Drum Width	Shipping Weight (calc.) Cable + Drum
2000 m	1000 mm	780 mm	190 kg
4000 m	1200 mm	780 mm	345 kg
6000 m	1400 mm	780 mm	510 kg
8000 m	1550 mm	1060 mm	690 kg
The shipping information are given for one-way reels. Reusable reels are available on request.

The information is believed to be accurate at time of issue.

Compare products and choose the best one

Compare features, sizes, models to find the perfect option for you