Home chevron_right Products chevron_right Fiber Optic Cables chevron_right MiDia®²⁰⁰ Micro GX

Descontinuado

Code - 06946-01

MiDia®²⁰⁰ Micro GX

Loose Tube Fibre Optic Outdoor Cable 24 Element All Dielectric Dry Core Design MiDia®200 Micro GX

Application

Air-Blown Installation into Micro Ducts

Recommended duct size for optimized blowing performance: 14, 15 and 16 mm Inner Diameter

Pushforce [N]: 350 in 14 mm ID-Duct

Design

Optical Fibers 200 µm
Gel-filled Buffer Tubes
Non-metallic Central Member
Ripcords
PE-Jacket

Features

Bend insensitive 200µm Fibers
Small tubes for a reduced outer diameter
Dry Core Design – Cable core water blocked by means of dry “water swellable” technology – for quicker, cleaner cable prep for jointing
Individual colored tubes

Version illustrated is the 576 Fiber Cable

Product Specification

Product Specification
Fiber Count	Tubes	Core Design	Outer Diameter Mm	Cable Weight Kg Km	Standard Length M	AT-Code*
24 Fibers per Tube
576	24	1+24	9.6	95	2000 / 4000 / 6000	AT-[ ][ ][ ]453F-576
This table shows nominal diameter and weight values which may differ in shipments. *Please refer to the LIGHTERAAT-Code.

Identification Tube Color Code

Identification Tube Color Code
1+10+22	Blue
2+11+23	Orange
3+12+24	Green
4+13	Brown
5+14	Grey
6+15	White
7+16	Red
8+17	Black
9+18	Yellow
19	Violet
20	Rose
21	Aqua

Identification Fiber Color Code

Identification Fiber Color Code
1	Blue
2	Orange
3	Green
4	Brown
5	Grey
6	White
7	Red
8	Black
9	Yellow
10	Violet
11	Rose
12	Aqua
13	Blue*
14	Orange*
15	Green*
16	Brown*
17	Grey*
18	White*
19	Red*
20	Natural
21	Yellow*
22	Violet*
23	Rose*
24	Aqua*
Note	* Black ring Alternative tube and fiber color code available on request.

Sheath Marking

LIGHTERA OPTICAL CABLE MIDIA200 MICRO GX [ID] [MM/YYYY] [Handset Sign] 576F [Meter Marking]

Alternative sheath printing available on request.

Mechanical Properties and Environmental Behavior

Mechanical Properties and Environmental Behavior
Tests according to IEC 60794
	Parameter	Requirement	Value
Tensile Performance IEC 60794-1-21-E1A and E1B	Long term load	– No attenuation increase*	Load: 800 N
		– No fiber strain
	Short term load, during installation	– No changes in attenuation before versus after load	Load: 3000 N
		– Max. fiber strain 0.5%
Crush Performance IEC 60794-1-21-E3A	Long term load	– No attenuation increase*	Load (Plate / Plate): 100 N
	Short term load	– No changes in attenuation before versus after load	Load (Plate / Plate): 600 N
		– No damage**
Bending Performance IEC 60794-1-21-E11	Handling fixed installed	– No attenuation increase*	Bend radius: 125 mm
	During installation (under load)	– No changes in attenuation before versus after load	Bend radius: 250 mm
Temperatures IEC 60794-1-22-F1 IEC 60794-5-10	Operation	– No attenuation increase*	-10 to +60°C
	Operation	– No attenuation increase***	-30 to +70°C
	Installation		-15 to +40°C
	Storage/Shipping		-40 to +70°C
* No changes in attenuation means that any changes in measurement value, either positive or negative within the uncertainty of measurement shall be ignored. The total uncertainty of measurement shall be less than or equal to 0.05 dB or 0.05 dB/km. Mechanical damage – when examined visually without magnification, there shall be no evidence of damage to the sheath. The imprint of plates will not be considered as damage. * No changes in attenuation either positive or negative higher than 0.15 dB/km in the 1550 nm range

Shipping Information

Shipping Information
Cable Length	Drum Diameter	Drum Width	Shipping Weight (calc.) Cable + Drum
2000 m	1000 mm	780 mm	240 Kg
4000 m	1200 mm	780 mm	440 kg
6000 m	1400mm	780 mm	660 Kg
The shipping information are given for one-way reels. Reusable reels are available on request.

Note

The information is believed to be accurate at time of issue.

Datasheet

Compare products and choose the best one

Compare features, sizes, models to find the perfect option for you

Compare products