Home chevron_right Products chevron_right Fiber Optic Cables chevron_right MiDia®²⁰⁰ Micro FX

Descontinuado

Code - 07247-01

MiDia®²⁰⁰ Micro FX

Loose Tube Fibre Optic Outdoor Cable 6 Element All Dielectric Dry Core Design MiDia®200 Micro FX

Application

Air-Blown Installation into Micro-Ducts Recommended duct size for optimized blowing performance: 8, 10 and 12 mm Inner Diameter Pushforce [N]: 350 in 8 mm ID-Duct

Other combinations are possible, please contact us for more information. Distance achievable depends on route, equipment and quality of duct.

Design

Optical Fibers (200µm)
Gel-filled Buffer Tubes
Non-metallic Central Member
Ripcord
PE-Jacket

Features

Small tubes for a reduced outer diameter
Dry Core Design – Cable core water blocked by means of dry “water swellable” technology – for quicker, cleaner cable prep for jointing
Individual colored tubes

Version illustrated is the 144 Fiber Cable

Product Specification

Product Specification
Fiber Count	Tubes	Core Design	Outer Diameter [mm]	Cable Weight [kg/km]	Standard Length [m]	AT-Code**
24 Fibers Per Tube
96	4	1+6 (2 Fillers*)	6.3	40	2000 / 4000 / 6000 / 8000	AT-[][][]46CF-096
144	6	1+6	6.3	40	2000 / 4000 / 6000 / 8000	AT-[][][]46CF-144
This table shows nominal diameter and weight values which may differ in shipments. Fillers are natural colored and evenly distributed over the positions. *Please refer to the LIGHTERA AT- Code. The blanks specify the fiber type

Identification Tube Color Code

Identification Tube Color Code
1	Blue
2	Orange
3	Green
4	Brown
5	Grey
6	White

Identification Fiber Color Code

Identification Fiber Color Code
1	Blue
2	Orange
3	Green
4	Brown
5	Grey
6	White
7	Red
8	Black
9	Yellow
10	Violet
11	Rose
12	Aqua
13	Blue*
14	Orange*
15	Green*
16	Brown*
17	Grey*
18	White*
19	Red*
20	Nature
21	Yellow*
22	Violet*
23	Rose*
24	Aqua*
Note	* Black ring Alternative tube and fiber color code available on request

Sheath Marking

Sheath Marking
LIGHTERA OPTICAL CABLE MIDIA200 MICRO FX [ID] [MM/YYYY] [Handset Sign] xxxF [Meter Marking] Alternative sheath printing available on request. In case of order the exact sheath printing text will be clarified with the customer.

Mechanical Properties and Environmental Behavior

Mechanical Properties and Environmental Behavior
Tests according to IEC 60794
	Parameter	Requirement	Value
Tensile Performance: IEC 60794-1-21-E1A and E1B	Short term load, during installation	– No changes in attenuation before versus after load – Max. fiber strain 0.5%	Load: 800 N
Crush Performance: IEC 60794-1-21-E3A	Long term load	– No attenuation increase*	Load (Plate / Plate): 300 N
	Short term load	– No changes in attenuation before versus after load – No damage**	Load (Plate / Plate): 1000 N
Bending Performance: IEC 60794-1-21-E11	Handling fixed installed	– No attenuation increase*	Bend radius: 90 mm
	During installation (under Load)	– No changes in attenuation before versus after load	Bend radius: 180 mm
Temperature Performance: IEC 60794-1-22-F1	Operation Installation Storage/Shipping	– No attenuation increase*	-30 to +70°C -15 to +40°C -40 to +70°C
* No changes in attenuation means that any changes in measurement value, either positive or negative within the uncertainty of measurement shall be less than of equal to 0.05 dB for Single-mode Fibers and 0.2 dB for Multimode Fibers. ** Mechanical damage – when examined visually without magnification, there shall be no evidence of damage to the sheath. The imprint of plates will not be considered as damage.

Shipping Information

Shipping Information
Cable Length	Drum Diameter	Drum Width	Shipping Weight (calc.) Cable + Drum
2000 m	1000 mm	780 mm	130 kg
4000 m	1000 mm	780 mm	210 kg
6000 m	1000 mm	780 mm	290 kg
8000 m	1200 mm	780 mm	385 kg
The shipping information are given for one-way reels. Reusable reels are available on request.

Note

The information is believed to be accurate at time of issue.

Datasheet

Compare products and choose the best one

Compare features, sizes, models to find the perfect option for you

Compare products