Air-Blown Installation into Micro-Ducts
Loose Tube Fibre Optic Outdoor Cable 6 Element All Dielectric Dry Core Design MiDia®200 Micro HX
Loose Tube Fibre Optic Outdoor Cable 6 Element All Dielectric Dry Core Design MiDia®200 Micro HX
Air-Blown Installation into Micro-Ducts
Version illustrated is the 72 Fiber Cable
Product Specification | ||||||
---|---|---|---|---|---|---|
Fiber Count | Tubes | Core Design | Outer Diameter [mm] | Cable Weight [kg/km] | AT-Code** | |
12 Singlemode Fibers Per Tube |
||||||
12 | 1 | 1+6 (5 Fillers*) | 4.2 | 23 | AT-[ ][ ][ ]4XXT-012 | |
24 | 2 | 1+6 (4 Fillers*) | 4.2 | 23 | AT-[ ][ ][ ]4XXT-024 | |
48 | 4 | 1 + 6 (2 Fillers*) | 4.2 | 23 | AT-[ ][ ][ ]4XXT-048 | |
72 | 6 | 1+6 | 4.2 | 23 | AT-[ ][ ][ ]4XXT-072 | |
This table shows nominal diameter and weight values which may differ in shipments. *Fillers are natural colored. ** Please refer to the LIGHTERA AT- Code. The blanks specify the fiber type. 8EE = (200 micron AllWave® Flex Zero-Water Peak Singlemode Fiber) 9EE = (200 micron AllWave® FLEX+ Zero-Water Peak Singlemode Fiber) |
Identification Tube and Fiber Color Code | |
---|---|
1 | Blue |
2 | Orange |
3 | Green |
4 | Brown |
5 | Grey |
6 | White |
7 | Red |
8 | Black |
9 | Yellow |
10 | Violet |
11 | Rose |
12 | Aqua |
Note | Alternative tube and fiber color code available on request |
LIGHTERA OPTICAL CABLE MIDIA200 MICRO HX [ID] [MM/YYYY] [Handset Sign] xxxF [Meter Marking]
Alternative sheath printing available on request.
Mechanical Properties and Environmental Behavior | |||
---|---|---|---|
Tests according to IEC 60794 | |||
Parameter | Requirement | Value | |
Tensile Performance IEC 60794-1-21-E1A and E1B |
Short term load, during installation | – No changes in attenuation before versus after load | Load: 600 N |
– Max. fiber strain 0.5% | |||
Crush Performance IEC 60794-1-21-E3A |
Short term load | – No changes in attenuation before versus after load | Load (Plate / Plate): 500 N |
– No damage** | |||
Bending Performance IEC 60794-1-21-E11 |
Handling fixed installed | – No attenuation increase* | Bend radius: 70 mm |
During installation (under Load) | – No changes in attenuation before versus after load | Bend radius: 140 mm | |
Temperature IEC 60794-1-22-F1 |
Operation | – No attenuation increase*** | -40 to +70°C |
Installation | -15 to +40°C | ||
Storage/Shipping | -40 to +70°C | ||
* No changes in attenuation means that any changes in measurement value, either positive or negative within the uncertainty of measurement shall be ignored. The total uncertainty of measurement shall be less than of equal to 0.05 dB. ** Mechanical damage – when examined visually without magnification, there shall be no evidence of damage to the sheath. The imprint of plates will not be considered as damage. *** No changes in attenuation either positive or negative higher than 0.15 dB/km in the 1550 nm range according to the Microcable Standard IEC 60794-5-10:2014 |
Shipping Information | |||
---|---|---|---|
Cable Length | Drum Diameter | Drum Width | Shipping Weight (calc) Cable + Drum |
2000 m | 1000 mm | 780 mm | 96 kg |
4000 m | 1000 mm | 780 mm | 142 kg |
6000 m | 1000 mm | 780 mm | 188 kg |
8000 m | 1000 mm | 780 mm | 234 kg |
The shipping information are given for one-way reels. Reusable reels are available on request. |
The information is believed to be accurate at time of issue.
Lightera reserves the right to make changes to the product(s) described in this document at any time without notice. This document is for informational purposes only and is not intended to modify or supplement any Lightera warranties or specifications relating to any of its products or services.
Compare features, sizes, models to find the perfect option for you
This section is under construction. To view our products, please select below.