Loose Tube Fibre Optic Outdoor Cable 8 Element All Dielectric Dry Core Design MiDia® Micro FX
Loose Tube Fibre Optic Outdoor Cable 8 Element All Dielectric Dry Core Design MiDia® Micro FX
Air-Blown Installation into Micro-Ducts
Recommended duct size for optimized blowing performance: 10, 12 and 14 mm Inner Diameter
Pushforce [N]: 350 in 10 mm ID-Duct
Other combinations are possible, please contact us for more information. Distance achievable depends on route, equipment and quality of duct
Version illustrated is the 96 Fiber Cable
| Product Specification | ||||||
|---|---|---|---|---|---|---|
| Fiber Count | Tubes | Core Design | Outer Diameter [mm] | Cable Weight [kg/km] | Standard Length [m] | AT-Code** |
| 96 | 8 | 1+8 | 7.6 | 55 | 2000 / 4000 / 6000 / 8000 | AT-[][][]46CT-096 |
| This table shows nominal diameter and weight values which may differ in shipments. * Fillers are natural colored and evenly distributed over the positions ** Please refer to the LIGHTERA AT- Code. The blanks specify the fiber type. |
||||||
| Identification Tube and Fiber Color Code | |
|---|---|
| 1 | Blue |
| 2 | Orange |
| 3 | Green |
| 4 | Brown |
| 5 | Grey |
| 6 | White |
| 7 | Red |
| 8 | Black |
| 9 | Yellow |
| 10 | Violet |
| 11 | Rose |
| 12 | Aqua |
| Sheath Marking |
|---|
| LIGHTERA OPTICAL CABLE MIDIA MICRO FX [ID] [MM/YYYY] [Handset Sign] xxxF [Meter Marking] Alternative sheath printing available on request. In case of order the exact sheath printing text will be clarified with the customer. |
| Mechanical Properties and Environmental Behavior | |||
|---|---|---|---|
| Tests according to IEC 60794 | |||
| Parameter | Requirement | Value | |
| Tensile Performance: IEC 60794-1-21-E1A and E1B |
Long term load | – No attenuation increase* – No fiber strain |
Load: 200 N |
| Short term load, during installation | – No changes in attenuation before versus after load – Max. fiber strain 0.5% |
Load: 1100 N | |
| Crush Performance: IEC 60794-1-21-E3A |
Long term load | – No attenuation increase* | Load (Plate / Plate): 300 N |
| Short term load | – No changes in attenuation before versus after load – No damage** |
Load (Plate / Plate): 1000 N | |
| Bending Performance: IEC 60794-1-21-E11 |
Handling fixed installed | – No attenuation increase* | Bend radius: 140 mm |
| During installation (under load) | – No changes in attenuation before versus after load | Bend radius: 280 mm | |
| Temperature Performance: IEC 60794-1-22-F1 |
Operation Installation Storage/Shipping |
– No attenuation increase* | -40 to +70°C -15 to +40°C -40 to +70°C |
| * No changes in attenuation means that any changes in measurement value, either positive or negative within the uncertainty of measurement shall be ignored. The total uncertainty of measurement shall be less than of equal to 0.05 dB for Single-mode Fibers and 0.2 dB for Multimode Fibers. ** Mechanical damage – when examined visually without magnification, there shall be no evidence of damage to the sheath. The imprint of plates will not be considered as damage. |
|||
| Shipping Information | |||
|---|---|---|---|
| Cable Length | Drum Diameter | Drum Width | Shipping Weight (calc.) Drum + Cable |
| 2000 m | 1000 mm | 780 mm | 160 kg |
| 4000 m | 1000 mm | 780 mm | 270 kg |
| 6000 m | 1200 mm | 780 mm | 395 kg |
| 8000 m | 1400 mm | 780 mm | 530 kg |
| The shipping information are given for one-way reels. Reusable reels are available on request. | |||
The information is believed to be accurate at time of issue.
Lightera reserves the right to make changes to the product(s) described in this document at any time without notice. This document is for informational purposes only and is not intended to modify or supplement any Lightera warranties or specifications relating to any of its products or services.
Compare features, sizes, models to find the perfect option for you
This section is under construction. To view our products, please select below.
