Optical Splitters are passive components that perform the optical signal splitting in a PON network. They are composed of 1 input fiber and N output fibers, which divide the power of the optical signal proportionally between them, characterizing them as balanced splitters. They are mainly used in FTTx / PON optical networks and in HFC networks (cable TV).Available in three models:- Connectorized in the outlputs and inputs.- Connected only at the outputs;- Not connectorized.
Optical Splitters are passive components that perform the optical signal splitting in a PON network. They are composed of 1 input fiber and N output fibers, which divide the power of the optical signal proportionally between them, characterizing them as balanced splitters. They are mainly used in FTTx / PON optical networks and in HFC networks (cable TV).Available in three models:- Connectorized in the outlputs and inputs.- Connected only at the outputs;- Not connectorized.
Optical splitters are passive components applied for optical power division on PON network. They consist of an input fiber and N output fibers, which divide the power of the optical signal proportionally, been characterized as a balanced splitters.
Mainly used in optical networks FTTx / PON networks and HFC (Cable TV).
Available in three models:
– Input and Outputs with connectors.
– Connectors only on output ports;
– Input and Outputs without connectors.
Splice Trays or Connectorized Modules.
Input and output fibers: "Bend Loss Insensitive" G.657A (2) – Single Mode
TELCORDIA GR-1209 (Generic Requirements for Passive Optical Components)
TELCORDIA GR-1221 (Reliability Requirements for Passive Optical Components)
IEC 61753-1 (Fibre Optic Interconnecting Devices and Passive Components Performance Standard)
ANATEL Homologation: 01837-11-00256 and 01835-11-00256
Individual test report (Insertion Loss and Return Loss measures(1))
12 months
| Parameter | 1×2 | 1×4 | 1×8 | 1×16 | 1×32 | 1×64 |
| Optical Bandpass | PLC: 1260~1650 FBT:1260~1360nm and 1480~1650nm | |||||
| Maximum Insertion Loss (dB)* | 3,7 | 7,1 | 10,5 | 13,7 | 17,1 | 20,5 |
| Uniformity (dB) | 0,5 | 0,6 | 1 | 1,3 | 1,5 | 1,7 |
| Maximum Polarization Dependent Loss (PDL) | 0,2 | 0,2 | 0,25 | 0,3 | 0,4 | 0,5 |
| Directivity (dB) | >55 | |||||
| ReturnLoss (dB) | >55 | |||||
* without connector loss. Add 0.3dB for connectorized splitters.
Indoor or Outdoor ready (in a suitable box).
SPLITTER WITH CONNECTOR:
|
Parameter
|
1×2 50/50 FBT
|
1×2 PLC
|
1×4
|
1×8
|
||||
|
Model
|
I/O
|
O
|
I/O
|
O
|
I/O
|
O
|
I/O
|
O
|
|
Depht
|
50mm
|
55mm
|
55mm
|
55mm
|
||||
|
Diameter
|
3.0mm
|
N/A
|
N/A
|
N/A
|
||||
|
Width
|
N/A
|
7mm
|
7mm
|
7mm
|
||||
|
Height
|
N/A
|
4mm
|
4mm
|
4mm
|
||||
|
Input fiber length
|
1.5m
|
0.6m
|
1.5m
|
0.6m
|
1.5m
|
0.6m
|
1.5m
|
0.6m
|
|
Output fiber length
|
0.6m
|
0.6m
|
0.6m
|
0.6m
|
0.6m
|
0.6m
|
0.6m
|
0.6m
|
|
Fiber diameter
|
900µm or 2mm
|
|||||||
FBT splitter only with fiber diameter of 900µm.
| Parameter | 1×8 Compacto | 1×16 | 1×32 | ||
| Model | O | I/O | O | I/O | O |
| Depth | 90mm | 60mm | 80mm | ||
| Diameter | N/A | N/A | N/A | ||
| Width | 20mm | 12mm | 20mm | ||
| Heigth | 10mm | 4mm | 6mm | ||
| Input fiber length | 2.0m | 1.5m | 0.6m | 1.5m | 0.6m |
| Output fiber length | 0.7 or 0.9m | 0.6m | 0.6m | 0.6m | 0.6m |
| Fiber Diameter |
900µm or 2mm
|
||||
O – Output connectorized splitter;
I/O – Input and Output connectorized splitter.
SPLITTER WITHOUT CONNECTOR:
| Parameter |
1×2 50/50 FBT |
1×2 PLC |
1×4 |
1×8 |
1×16 |
1×32 |
1×64 |
| Depth |
50mm |
40mm |
40mm |
40mm |
40mm |
50mm |
60mm |
| Diameter |
3mm |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
| Width |
N/A |
4mm |
4mm |
4mm |
4mm |
7mm |
12mm |
| Heigth |
N/A |
4mm |
4mm |
4mm |
4mm |
4mm |
4mm |
| Fiber Length (I/O) |
2m |
||||||
| Fiber Diameter |
250µm |
||||||
Compare features, sizes, models to find the perfect option for you
