12 fibers totally dry optical cable pre-terminated with singlefiber or multifiber connectors, for interconnection between cabinets or racks.
12 fibers totally dry optical cable pre-terminated with singlefiber or multifiber connectors, for interconnection between cabinets or racks.
Dielectric indoor cable formed by a single thermoplastic tube with 8 or 12 fibers. Strength member composed by aramid yarns and FRP (Fiberglass-Reinforced Plastic). Flame retardant jacket for indoor applications, pre-terminated in factory using optical connectors.
Available assembled at both ends with MPO optical connectors or with MPO connector assemblies on an end and monofiber connectors at the opposite end.
Supports IEEE 802.3ae – 10 Gbs Ethernet ,ANSI T11.2 – Fibre Channel e IEE 802.3-2015 Seção 6 40/100 Gbs Ethernet
Indoor
Non Aggressive
OPTIC-LAN 8F UT: Nominal Outer Diameter: 5.1 mm
OPTIC-LAN 12F UT: Nominal Outer Diameter: 5.5 mm
Attention: Bend radius during the installation: max 20x cable diameter. Bend radius after installation 10x cable diameter.
From 10 to 200m
* Additional lenghts available upon request.
Multimode OM3 or OM4: Aqua
Single mode BLI: Yellow or Blue (ABNT)
Optical Cable Totally Dry: Cable is made of totally dry 'loose' tube, dielectric strength member and flame retardant thermoplastic providing mechanical protection to the fibers. The inner tube is dry, gel-free, for indoor use. The optical fibers are grouped in one unique tube up to 12 fibers. With external jacket flame retardant.
LC, SC, ST, FC, E2000 or MPO/MTP
MPO polarity can be type A or B and the gender male – with pin guide or female without the pin guide.
**For more information, please consult ET03770 – Performance of Optical Connectors
Multimode OM3 (50/125µm)
Multimode OM4 (50/125µm)
Single mode G-657A2 (9/125µm)
Compare features, sizes, models to find the perfect option for you
