Home chevron_right Products chevron_right Optical Cables chevron_right Drop Cable chevron_right OPTICAL CABLE CFOAC-BLI-CD-02-AR-LSZH A2 GY – EUROCLASS Dca (s2, d1, a1) – RIB 500m (DROP COMPACTO FIG.8 LOW FRICTION)

Descontinuado

Code - 19842109

OPTICAL CABLE CFOAC-BLI-CD-02-AR-LSZH A2 GY – EUROCLASS Dca (s2, d1, a1) – RIB 500m (DROP COMPACTO FIG.8 LOW FRICTION)

Optical Cable Drop Flat Compact Dielectric Figure 8 recommended for use in FTTx networks for final client access in FTTH or FTTA networks, for self-supported aerial installations, interconnecting external optical cables from the last splice box to the premises.Its construction type figure 8, gives the product great ease of installation and reliability of the network added to the low cost of installation and maintenance.Compact figure 8 type cable with low friction cover, dielectric traction elements and metal messenger allows the cable to be pulled or pushed through the duct, eliminating the use of a guide in the installation.

Construction

ROHS Compliant

Dielectric optical unit

Low friction

Description

Figure 8 type cable, it presents compact dimensions and low friction external sheath. Specially developed for last mile applications (drop) in FTTH and FTTA networks. Strength members allow it to be pushed thru ducts, not only pulled thru them.

Application

Installation Environment	Indoor/Outdoor
Operation Environment	Self-supported and ducts

Standard

ANATEL – Lista de Requisitos Técnicos para Produtos de TelecomunicaçõesCategoria I (Self-sustainable Fiber Optical Cable – Drop Fiber Optical Cable for spans of 80 m);
ITU-T G.657: "Characteristics of a bending loss insensitive single mode optical fibre and cable for the access network";
IEC 60332-1-2: “Tests on electric and optical fibre cables under fire conditions – Part 1-2: Test for vertical flame propagation for a single insulated wire or cable – Procedure for 1 kW pre-mixed flame”;
IEC 61034-2: “Measurement of smoke density of cables burning under defined conditions – Part 2: Test procedure and requirements”;
EN 50399: "Common test method for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results";
EN 50267-2-3: "Common test method for cables under fire conditions. Test on gases evolved during combustion of materials from cables. Procedures. Determination of degree of acidity of gases by determination of the weighted average of pH and conductivity";

Standard	Requeriment	Limit
EN 50399	Total Heat Release	≤ 70 MJ
	Peak Heat Release Rate	≤ 400 kW
	Fire Index Growth Rate	≤ 1300 W/s
EN 60332-1-2	Height	≤ 425mm