OPDC Cable
Code -
16631002
OPTICAL CABLE OPDC-M (24F SM 10,1mm GALVANIZED STEEL) 51mm2
OPDC is used in power distribution network as a messenger, neutral or neutral (auxiliary) cable. Furukawa Electric, manufactures OPDC cable in Brazil and resells fixing hardware and accessories. This guarantees electrical, mechanical and optical characteristics of the cable and its components
OPDC is used in power distribution network as a messenger, neutral or neutral (auxiliary) cable. Furukawa Electric, manufactures OPDC cable in Brazil and resells fixing hardware and accessories. This guarantees electrical, mechanical and optical characteristics of the cable and its components
Product Type
Construction
| Stainless steel tube |
| Plastic PTB |
| Galvanized steel wires |
Description
OPDC-M cable equivalent to 3/8 " consisting of a plastic tube envolved by a stainless steel tube and galvanized steel wires HS Class A.
Application
| Installation Environment | Overhead distribution lines – spans up to 80m |
| Operating Environment | Messenger cable for overhead distribution lines |
Standard
- ABNT NBR 14074
- ABNT NBR 15992
- ITU-T G.652
Constructive Characteristic
| Characteristics | Value |
| Nominal cross section area (mm2) | 51 |
| Center: stainless steel tube – qty. x diameter (mm) | 1 x 4.00 |
| Layer 1: galvanized steel wires HS Class A – qty. x diameter (mm) | 7 x 3.05 |
| Lay direction – outer layer | Left hand |
| Nominal overall diameter (mm) | 10.1 |
| Tensile strength (kgf) | 4,900 |
| Approximate mass (kg/km) | 456 |
| Electrical resistance DC at 20ºC (Ω/km) | 3.8 |
| Módulus of elasticity (N/mm2) | 206,000 |
| Coefficient of linear expansion (1/ºC) | 11.5 x 10-6 |
| Bending radius (mm) | 152.0 |
Optical Fiber
Singlemode(SM) Optical fibers coated by acrylate resin which could.
Fiber Identification
| Fiber | Color |
| 1 | Green |
| 2 | Yellow |
| 3 | White |
| 4 | Blue |
| 5 | Red |
| 6 | Violet |
| 7 | Brown |
| 8 | Rose |
| 9 | Natural |
| 10 | Gray |
| 11 | Orange |
| 12 | Aqua |
| 13 a 24 | Same color (1 a 12) with 1 black ring mark |
Cross Section
Optical Characteristics
| Technical Specification | Optical Fiber |
| ET02000 (Annex A – Singlemode Optical Fiber Characteristics) |
ITU-T G.652.D |
| Optical Attenuation (dB/km) | 0,36 dB/km at 1310nm 0,22 dB/km at 1550nm |
Compare products and choose the best one
Compare features, sizes, models to find the perfect option for you
