A combination ITU-T G652.D and G657.A1 compliant fiber, AllWave+ Fiber delivers low and stable loss in the 1360 nm -1460 nm E-band, enabling 16-channel CWDM, DWDM and FTTX support on a single fiber. In addition, this fiber's bend performance far exceeds G.652.D and complies with G.657.A1, supporting a minimum bend radius of 10 mm and lower bend loss than conventional single-mode fibers.
While this low bend loss improves performance and reliability, it also helps to lower installation costs by allowing the use of smaller cables and terminals. AllWave+ Fiber has the same 9.2 micron mode field diameter as and is fully backward compatible with the installed base of G.652 single-mode fiber for seamless splicing, testing and faster network turn-up.
A combination ITU-T G652.D and G657.A1 compliant fiber, AllWave+ Fiber delivers low and stable loss in the 1360 nm -1460 nm E-band, enabling 16-channel CWDM, DWDM and FTTX support on a single fiber. In addition, this fiber's bend performance far exceeds G.652.D and complies with G.657.A1, supporting a minimum bend radius of 10 mm and lower bend loss than conventional single-mode fibers.
While this low bend loss improves performance and reliability, it also helps to lower installation costs by allowing the use of smaller cables and terminals. AllWave+ Fiber has the same 9.2 micron mode field diameter as and is fully backward compatible with the installed base of G.652 single-mode fiber for seamless splicing, testing and faster network turn-up.
AllWave+ Fiber provides outstanding cable performance and design freedom for fiber management systems in:
When compared to conventional single-mode fiber, AllWave+ Zero Water Peak (ZWP) Single-Mode Fiber dramatically improves performance across the 1260 nm – 1625 nm spectrum. This fiber offers all the benefits of AllWave Fiber plus a 40% smaller minimum bend radius, a 50% lower bend loss and a 33% improved polarization mode dispersion (PMD) link design value.
A combination ITU-T G652.D and G657.A1 compliant fiber, AllWave+ Fiber delivers low and stable loss in the 1360 nm -1460 nm E-band, enabling 16-channel CWDM, DWDM and FTTX support on a single fiber. In addition, this fiber's bend performance far exceeds G.652.D and complies with G.657.A1, supporting a minimum bend radius of 10 mm and lower bend loss than conventional single-mode fibers.
While this low bend loss improves performance and reliability, it also helps to lower installation costs by allowing the use of smaller cables and terminals. AllWave+ Fiber has the same 9.2 micron mode field diameter as and is fully backward compatible with the installed base of G.652 single-mode fiber for seamless splicing, testing and faster network turn-up.
| Product Specifications | ||
|---|---|---|
| Physical Characteristics | ||
| Clad Diameter | 125.0 ± 0.7 μm | |
| Clad Non-Circularity | ≤ 0.7 % | |
| Core/Clad Concentricity Error (Offset) | ≤ 0.5 μm, < 0.2 μm typically | |
| Coating Diameter (Uncolored) | 237 – 247 µm | |
| Coating-Clad Concentricity Error (Offset) | ≤ 12 μm | |
| Tensile Proof Test | 100 kpsi (0.69 GPa) | |
| Coating Strip Force | Range: 1.0 N ≤ CSF ≤ 8.9 N | |
| Standard Reel Lengths | 50.4 km (31.3 miles) | |
| Attenuation Uniformity / Point Discontinuities at 1310 nm and 1550 nm | ≤ 0.05 dB | |
| Chromatic Dispersion | ||
| Zero Dispersion Wavelength (λ0) | 1302 – 1322 nm | |
| Zero Dispersion Slope (S0) | ≤ 0.090 ps/nm²-km | |
| Typical Dispersion Slope | 0.087 ps/nm²-km | |
| Cut-off Wavelength (λCC) | ≤ 1260 nm | |
| Group Refractive Index | ||
| at 1310 nm | 1.467 | |
| at 1550 nm | 1.468 | |
| Mode Field Diameter | ||
| at 1310 nm | 9.2 ± 0.4 µm | |
| at 1550 nm | 10.4 ± 0.5 µm (typical) | |
| Polarization Mode Dispersion (PMD) ² | ||
| Fiber PMD Link Design Value (LDV) ³ | ≤ 0.04 ps/√km | |
| Maximum Individual Fiber | ≤ 0.1 ps/√km | |
| Typical Fiber LMC PMD | ≤ 0.02 ps/√km | |
| Note | ² As measured with low mode coupling (LMC) technique in fiber form, value may change when cabled. Check with your cable manufacturer for specific PMD limits in cable form. | |
| ³ The PMD Link Design Value complies with IEC 60794-3, September 2001 (N = 20, Q = 0.01%). Details are described in IEC 61282-3 TR Ed 2, October 2006. | ||
| Optical Characteristics | ||
|---|---|---|
| Attenuation at | Maximum | Typical |
| 1310 nm | ≤ 0.34 dB/km | ≤ 0.33 dB/km |
| 1385 nm | ≤ 0.31 dB/km | ≤ 0.27 dB/km |
| 1490 nm | ≤ 0.24 dB/km | ≤ 0.21 dB/km |
| 1550 nm | ≤ 0.20 dB/km | ≤ 0.19 dB/km |
| 1625 nm | ≤ 0.24 dB/km | ≤ 0.20 dB/km |
| Attenuation vs. Wavelength¹ | ||
|---|---|---|
| Range (nm) | Reference (nm) λ | α |
| 1285 – 1330 | 1310 | 0.03 |
| 1360 – 1480 | 1385 | 0.04 |
| 1525 – 1575 | 1550 | 0.02 |
| 1460 – 1625 | 1550 | 0.04 |
| ¹ The attenuation in a given wavelength range does not exceed the attenuation of the reference wavelength (λ) by more than the value α. | ||
| Macrobending Attenuation | ||
|---|---|---|
| The maximum attenuation with bending does not exceed the specified values under the following deployment conditions: |
||
| Deployment Condition |
Wavelength
|
Induced Attenuation |
| 1 turn on a 10 mm radius mandrel |
1550 nm
|
≤ 0.75 dB |
| 1 turn on a 10 mm radius mandrel |
1625 nm
|
≤ 1.5 dB |
| 10 turns on a 15 mm radius mandrel |
1550 nm
|
≤ 0.25 dB |
| 10 turns on a 15 mm radius mandrel |
1625 nm
|
≤ 1.0 dB |
| 100 turns on 30 mm radius mandrel |
1550 nm
|
≤ 0.03 dB |
| 100 turns on 30 mm radius mandrel |
1625 nm
|
≤ 0.03 dB |
| Environmental Characteristics (at 1310, 1550 & 1625 nm) | |
|---|---|
| Temperature Cycling (-60 + 85 °C) | ≤ 0.05 dB/km |
| High Temperature Aging (85 ± 2 °C) | ≤ 0.05 dB/km |
| Temperature & Humidity Cycling (at -10 ºC to +85 ºC and 85 to ~98% RH) | ≤ 0.05 dB/km |
| Water Immersion (23 ± 2 °C) | ≤ 0.05 dB/km |
| Dynamic Fatigue Stress Corrosion Parameter (nd) | ≥ 20 |
For additional information please contact your sales representative. You can also visit our website at www.lightera.com or call 1-888-FIBERHELP (1-888-342-3743) USA or 1-770-798-555 outside the USA. For a full list of our certifications, visit our website.
Compare features, sizes, models to find the perfect option for you
This section is under construction. To view our products, please select below.
