Home chevron_right Products chevron_right Specialty Optical Fiber chevron_right Imaging, Sensing, and Harsh Environment Optical Fiber

Descontinuado

Part no - F9022

Imaging, Sensing, and Harsh Environment Optical Fiber

Imaging, Sensing, and Harsh Environment Optical Fiber P/N: F9022

Cladding Diameter

101 – 200 µm

Coating Diameter

< 200 µm

Coating Type

Polyimide [PYROCOAT]

Fiber Type

Polarization-Maintaining

Numerical Aperture

0.16 – 0.20

Operating Temperature

High-Temp

Operating Wavelength (nm)

980

Product Specifications

Product Specifications
Product Description	Imaging, Sensing, and Harsh Environment Optical Fiber
Physical Characteristics
Coating Material	PYROCOAT®
Cladding Diameter	125 ± 1 µm
Coating/Buffer Diameter	155 ± 5 µm
Core/Clad Offset	≤ 0.3 µm
Clad Non-Circularity	≤ 2.0%
Optical Characteristics
Type	Single-Mode
Operating Wavelength	980 nm
Cutoff Wavelength	930 ± 30 µm
Mode Field Diameter	5.0 ± 0.3 µm
Attenuation @ 980 nm	≤ 3.0 dB/km
Numerical Aperture (Nominal)	0.16
Mechanical and Environmental
Operating Temperature	-65 to +300°C
Proof Test Level	200 kpsi (1.38 GPa)
Order by Part Number	F9022
NOTE	NOTE: Lightera polyimide optical fibers are known to operate in environments up to 300 °C. Performance is application dependent. Contact our Technical Sales department to discuss your specific application requirements. 1-860-678-6636

Contact Information

For additional information please contact your sales representative. You can also visit our website at www.lightera.com or call 1-888-FIBERHELP (1-888-342-3743) USA or 1-770-798-5555 outside the USA. For a full list of our certifications, visit our website.

Trademark Notice and Disclaimer

Lightera reserves the right to make changes to the product(s) described in this document at any time without notice. This document is for informational purposes only and is not intended to modify or supplement any Lightera warranties or specifications relating to any of its products or services.