OPDC Cable
Code -
16621004
OPTICAL CABLE OPDC-N (36F SM 8.6mm ALUMINUM CLAD STEEL WIRE) 37mm2
OPDC is used in power distribution network and transmission lines below conductor phases neutral (auxiliary) cable.Furukawa Electric, manufactures OPDC cable in Brazil and resells fixing hardware and accessories. This guarantees electrical, mechanical and optical characteristics of the cable and its components
OPDC is used in power distribution network and transmission lines below conductor phases neutral (auxiliary) cable.Furukawa Electric, manufactures OPDC cable in Brazil and resells fixing hardware and accessories. This guarantees electrical, mechanical and optical characteristics of the cable and its components
Product Type
Construction
| Stainless steel tube |
| Aluminum clad steel wires 20% IACS |
Description
OPDC cable is composed of a stainless steel tube (maximum capacity of 48 fibers SM) and aluminum-clad steel wires (20% IACS).
Application
| Installation Environment | Overhead power distribution or transmission networks |
| Operating Environment | Auxiliary metallic cable below phase conductors in transmission lines or auxiliary neutral cable in distribution lines |
Standard
- ABNT NBR 14074
- ITU-T G.652
Constructive Characteristic
| Characteristics | Value |
| Nominal cross-section area (mm2) | 37 |
| Center: stainless steel tube – qty. x diameter (mm) | 1 x 3.50 |
| Layer 1: aluminum clad steel wires (20% IACS) – qty. x diameter (mm) | 7 x 2.59 |
| Lay direction – outer layer | Left hand |
| Nominal overall diameter (mm) | 8.63 |
| Tensile strength (kN) | 44.4 |
| Approximate mass (kg/km) | 272 |
| Electrical resistance DC at 20ºC (Ω/km) | 2.30 |
| Módulus of elasticity (N/mm2) | 162,000 |
| Coefficient of linear expansion (1/ºC) | 13 x 10-6 |
| Bending radius (mm) | 130.0 |
Optical Fiber
Singlemode(SM)
Fiber Identification
| Fiber | Color |
| 1 | Green |
| 2 | Yellow |
| 3 | White |
| 4 | Blue |
| 5 | Red |
| 6 | Violet |
| 7 | Brown |
| 8 | Rose |
| 9 | Natural |
| 10 | Gray |
| 11 | Orange |
| 12 | Aqua |
| 13 a 24 | Same color (1 a 12) with 1 black ring mark |
| 25 a 36 | Same color (1 a 12) with 2 black ring marks |
| 37 a 48 | Same color (1 a 12) with 3 black ring marks |
Cross Section
Optical Characteristics
| Technical Specification | Optical Fiber |
| ET 2000 (Annex A – Singlemode Optical Fiber Characteristics) | ITU-T G.652.D |
Compare products and choose the best one
Compare features, sizes, models to find the perfect option for you
