Replacing Bundled Borosilicate Fiber with Multimode Fiber: A Disruptive Platform for Next-Generation Endoscopy
EXECUTIVE SUMMARY
Endoscopy has historically advanced by making imaging probes smaller, more flexible, and more clinically informative. Conventional fiber-based endoscopes rely heavily on coherent bundles of many individual glass fibers, often based on borosilicate or silica fiber architectures, where each fiber core functions as a discrete image element. This approach has enabled decades of clinical utility, but it also imposes a fundamental design tradeoff: as the bundle diameter decreases, the number of imaging cores decreases, pixelation becomes more pronounced, and spatial resolution becomes constrained by core packing density, inter-core spacing, and distal optics.
Multimode fiber offers a disruptive but still early-stage alternative. Instead of transmitting an image through thousands of physically separated cores, a single multimode fiber can transmit high spatial information density through many guided modes within one compact waveguide. With wavefront shaping and transmission-matrix calibration, multimode fiber can be transformed from an apparently scrambled light guide into a controllable imaging conduit. Early research has demonstrated that multimode-fiber-based endoscopy can support ultrathin, high-resolution imaging, including in vivo imaging with subcellular-scale potential, while reducing distal probe diameter and opening new procedural pathways. However, this should be viewed as an emerging platform that still requires further development in bend tolerance, clinical workflow integration, and regulatory validation before it can become a practical replacement for established fiber-bundle architectures.
The Limitations of Bundled Borosilicate Fiber Endoscopy
Coherent fiber bundles are conceptually simple: they preserve the relative position of thousands of individual fibers from the distal tip to the proximal image plane. Their strength is mechanical flexibility and direct image relay. Their weakness is that the imaging grid is physically fixed by the number, size, and spacing of individual fibers. The bundle therefore behaves like a hard-wired pixel array; any reduction in diameter tends to reduce the number of available cores, and the spaces between cores introduce dead zones that degrade resolution.
These limitations matter most in the applications where miniaturization is most valuable, such as pediatrics, brain imaging, and procedures within small blood vessels and the fine structures within the lungs. However, in traditional bundle designs, making the probe smaller can degrade the very image quality needed for confident diagnosis or therapy guidance. This creates a practical ceiling on how far bundled borosilicate architectures can scale into the next generation of endoscopy.

Fig. 1 Schematic of a typical endoscope with an expanded schematic of the imaging bundle as well as the next generation multimode fiber endoscope concept.
Why Multimode Fiber Changes the Architecture
A multimode fiber does not need one core per image pixel. Instead, it supports many spatial modes that can carry complex optical information through a single fiber. At first glance, modal mixing appears to be a disadvantage because the output pattern becomes scrambled. The disruptive insight is that this scrambling is deterministic enough to be measured, modeled, and inverted. Once the relationship between input and output fields is characterized, the fiber can be used as a programmable optical conduit for focusing, scanning, and illumination shaping, which can be applied to fluorescence imaging, reflectance imaging, Raman interrogation, photoacoustic excitation, or other modalities.
This shift replaces a physical sampling limitation with a computational and optical-control problem. The result is a new design space: smaller fibers can deliver higher information density, distal optics can be simplified, and imaging performance can be tuned through algorithms, calibration strategy, and waveguide design. In practical terms, multimode fiber creates the possibility of endoscopes that are thinner than traditional coherent bundles while still supporting high-resolution imaging performance. At the same time, this architecture remains pre-commercial for many endoscopy use cases, and its clinical value will depend on proving that image quality, calibration robustness, and reliability can be maintained in real-world procedural conditions.

Fig. 2 Top shows a schematic of conventional imaging using a fiber bundle. Bottom shows a schematic of the emerging multimode fiber imaging through a much smaller diameter fiber conduit.
Technical Differentiators
- Higher information density in a smaller cross-section
In a bundled fiber, spatial sampling is limited by the physical core count. In a multimode fiber, information capacity is linked to the number of supported modes, numerical aperture, and wavelength. This enables a compact fiber to carry rich spatial information without requiring thousands of individually registered cores. For device designers, this means the imaging channel can shrink while preserving, and potentially improving, image fidelity. - Reduced pixelation and bundle artifacts
Coherent bundles inherently produce a sampled image with visible core structure, especially as bundle diameter decreases. Multimode-fiber imaging avoids the one-core-per-pixel architecture and can reconstruct images through controlled illumination and the appropriate algorithms. This provides a path toward smoother images and better visualization of fine structures that may be hidden by inter-core gaps in traditional bundles. - Compatibility with advanced contrast mechanisms
Multimode-fiber platforms are not limited to white-light imaging. Literature and prototype systems indicate compatibility with confocal imaging, fluorescence imaging, two-photon excitation, Raman imaging, photoacoustic techniques, and numerous other modalities. This matters because the future of endoscopy is not simply smaller cameras; it is multimodal tissue interrogation inside smaller anatomical spaces. - Potential for lower distal complexity
Traditional microendoscopes often require miniaturized lenses, scanners, GRIN optics, prisms, or mechanical actuation at the distal end. These components add diameter, stiffness, cost, and reliability risk. Multimode-fiber architectures can move much of the complexity to the proximal console, where wavefront control, computation, and image reconstruction are easier to manage. A simpler distal tip may improve access, reduce trauma, and simplify sterilization or single-use probe design.
Clinical Opportunity Area 1: Pediatric Endoscopy
Pediatrics is one of the clearest use cases for smaller, higher-resolution optical probes. Children, infants, and neonates present anatomical constraints that magnify every millimeter of device diameter. Smaller endoscopes can reduce insertion trauma, improve maneuverability, and enable access to structures that are difficult or impossible to inspect with adult-sized devices. However, pediatric procedures cannot accept reduced image quality as the price of miniaturization.
Multimode fiber addresses this tension directly. A single, small-diameter imaging fiber could support high-resolution visualization in constrained pediatric anatomy while preserving working-channel space for irrigation, aspiration, guidewires, illumination, therapy delivery, or sensing. Potential applications include neonatal airway assessment, pediatric bronchoscopy, otolaryngology, urology, gastrointestinal evaluation, and minimally invasive surgical guidance in small cavities. The value proposition is not only smaller access; it is smaller access with diagnostic-grade optical information.
Clinical Opportunity Area 2: Vascular and Intraluminal Imaging
Vascular imaging is another compelling opportunity because clinical value is closely tied to the ability to visualize tissue composition while minimizing trauma to surrounding tissue. Coronary, peripheral, neurovascular, and microvascular procedures all benefit from smaller imaging elements that can navigate tortuous anatomy while preserving lumen access. Conventional intravascular imaging technologies such as OCT, IVUS, angioscopy, and near-infrared spectroscopy each provide valuable information, but catheter profile and integration complexity remain key design constraints.
A multimode-fiber imaging architecture could enable thinner forward-viewing or side-viewing probes capable of resolving plaque morphology, thrombus, stent apposition, vessel wall structure, microvascular features, or therapy response. In vascular applications, the ability to combine high-resolution imaging with light delivery and visualization with sensing such as temperature could enable a next-generation a multifunctional catheter platform rather than a single-purpose visualization tool.
Therapeutic Pathways Enabled by Smaller, Higher-Resolution Fibers
- Targeted biopsy and optical biopsy: Higher-resolution imaging in smaller spaces may improve lesion localization and support optical biopsy approaches that reduce the need for random tissue sampling.
- Pediatric airway and GI intervention: Smaller probes could allow visualization and therapy guidance in anatomy where current devices are too large or compromise working-channel utility.
- Vascular therapy guidance: Multimode-fiber probes could support assessment before, during, and after angioplasty, atherectomy, thrombectomy, ablation, stenting, or drug delivery.
- Image-guided energy delivery: A single-fiber platform may combine visualization with laser delivery, photodynamic therapy, thermal monitoring, or localized stimulation.
Commercial and Engineering Considerations
The path from laboratory demonstration to clinical adoption will depend on solving several engineering challenges. Multimode fibers are sensitive to bending, twisting, temperature, and strain because these effects alter modal coupling. Practical systems must therefore incorporate robust calibration, real-time compensation, bend-insensitive fiber designs, distal reference signals, adaptive algorithms, or operating modes that tolerate dynamic motion. Clinical adoption will also require validation and integration into existing platforms. In this respect, multimode-fiber endoscopy should be positioned as a promising early-stage technology platform, not as a drop-in commercial substitute today.
These challenges are significant but not disqualifying. They are the same type of system-level challenges that have historically accompanied disruptive optical platforms: OCT, confocal endomicroscopy, robotic endoscopy, and disposable digital scopes all required a shift from component performance to integrated clinical workflow. The commercial opportunity lies in building a complete imaging ecosystem around multimode fiber: fiber design, proximal optics, calibration software, image reconstruction, disposable probe assemblies, and procedure-specific clinical applications.
Strategic Positioning
The most compelling positioning for multimode fiber is not as a direct substitute for bundled borosilicate fiber in every legacy application. The stronger argument is that multimode fiber enables endoscopy in places where bundles are reaching their physical limits. It shifts the basis of competition from fiber count and bundle diameter to optical fiber design. This creates a defensible technology platform for high-value applications where smaller diameter and higher resolution unlock new clinical procedures.
For pediatric and vascular imaging, the clinical message is especially powerful: better visualization through a smaller device. That message aligns with physician demand for less invasive access, hospital demand for improved outcomes, and device-company demand for differentiated platforms that can support multiple therapy franchises.
Conclusion
Replacing bundled borosilicate fiber with multimode fiber is more than a materials change; it is an architectural shift in how endoscopic information is transmitted, reconstructed, and used clinically. Bundles are limited by physical pixelation and core packing. Multimode fiber converts a single compact waveguide into a high-density optical information channel. With the right combination of fiber design, wavefront control, calibration, and reconstruction software, this platform could enable smaller, sharper, and more capable endoscopes for pediatric care, vascular imaging, and other procedures where today’s devices are constrained by diameter and resolution.
The strategic opportunity is to move beyond incremental bundle improvement and develop a next-generation endoscopy platform that uses multimode fiber to deliver high-resolution imaging, multimodal sensing, and therapy guidance through a smaller footprint. For applications where access is limited and image quality is critical, multimode fiber has the potential to be genuinely disruptive.

Fig. 3 Schematic of emerging multimodal fiber sensing that includes channels for imaging, therapeutic power delivery, and sensing.