Demanding Fiber-to-the-Home, Business, and Node (FTTx), Hybrid Fiber Coaxial (HFC), and other applications require connectivity solutions that provide superior optical performance with high reliability. To meet this challenge, Lightera offers AllWave® FLEX+ ZWP Jumpers, the first ZWP jumpers to combine full spectrum low loss performance with very low bending loss.
As data rates and distances increase and power budgets tighten, it is imperative that optical components minimize signal loss to support current and future applications.
Conventional Single-Mode Fiber (CSFM) jumpers on the market today may exhibit high bending and connector loss when installed in real networks, limiting distance, bandwidth, and network reliability. AllWave FLEX+ ZWP Jumpers combine low bending loss with Lightera’ very low loss LC or SC connectors to help enable superior performance in any patch panel system.
AllWave FLEX+ ZWP Jumpers also minimize heat generated by the combination of high power transmission and fiber bends, preventing premature fiber coating failure and burning of cordage materials.
Demanding Fiber-to-the-Home, Business, and Node (FTTx), Hybrid Fiber Coaxial (HFC), and other applications require connectivity solutions that provide superior optical performance with high reliability. To meet this challenge, Lightera offers AllWave® FLEX+ ZWP Jumpers, the first ZWP jumpers to combine full spectrum low loss performance with very low bending loss.
As data rates and distances increase and power budgets tighten, it is imperative that optical components minimize signal loss to support current and future applications.
Conventional Single-Mode Fiber (CSFM) jumpers on the market today may exhibit high bending and connector loss when installed in real networks, limiting distance, bandwidth, and network reliability. AllWave FLEX+ ZWP Jumpers combine low bending loss with Lightera’ very low loss LC or SC connectors to help enable superior performance in any patch panel system.
AllWave FLEX+ ZWP Jumpers also minimize heat generated by the combination of high power transmission and fiber bends, preventing premature fiber coating failure and burning of cordage materials.
Demanding Fiber-to-the-Home, Business, and Node (FTTx), Hybrid Fiber Coaxial (HFC), and other applications require connectivity solutions that provide superior optical performance with high reliability. To meet this challenge, Lightera offers AllWave® FLEX+ ZWP Jumpers, the first ZWP jumpers to combine full spectrum low loss performance with very low bending loss.
As data rates and distances increase and power budgets tighten, it is imperative that optical components minimize signal loss to support current and future applications.
Conventional Single-Mode Fiber (CSFM) jumpers on the market today may exhibit high bending and connector loss when installed in real networks, limiting distance, bandwidth, and network reliability. AllWave FLEX+ ZWP Jumpers combine low bending loss with Lightera’ very low loss LC or SC connectors to help enable superior performance in any patch panel system.
AllWave FLEX+ ZWP Jumpers also minimize heat generated by the combination of high power transmission and fiber bends, preventing premature fiber coating failure and burning of cordage materials.
| AllWave FLEX+ LC and SC Jumper Specifications* | |
|---|---|
| Loss Maximum (per Connector End) | 0.25 dB |
| Return Loss Minimum (per Connector End) | 0.25 dB/.35C |
| Cable Od | 1.6, 2 or 3 mm |
| Cable Retention (cordage) | 20 lbs./88.9N |
| Mating Durability For 500 Reconnects | < 0.2 dB |
| Temperature Stability (-40 °c to +75 °c) | < 0.3 dB |
| Tip Material | Ceramic |
| Note | 0.25 dB/.35C Maximum insertion loss for LC and SC jumpers. * All others are 0.5 dB maximum. Return loss values are per connector end. www.lightera.com |
JP3WY001LCULCU003M – Jumper Plenum 3.0 mm AllWave® FLEX Fiber Yellow 1 fiber (Simplex) LCU LCU 003 Meters long
JR2WY002SCSSCA003M – Jumper Riser 2.0 mm AllWave FLEX Fiber Yellow 2 fibers (Zip) SCA SCA 003 Meters long
JV9WY001FCUUNC003M – Jumper 900 µm Low Smoke PVC AllWave FLEX Fiber Yellow 1 fiber FCU UNC (Pigtail) 003 Meters long
aaa b c ddd eee fff nnn g
JH1 = LSZH 1.6 mm
JH2 = LSZH 2.0 mm
JH3 = LSZH 3.0 mm
JH4 = LSZH 4.8 mm (Simplex Only)
JH5 = LSZH 4.8 mm I/O (Simplex Only)
JP3 = Plenum 3.0 mm
JP4 = Plenum 4.8 mm (Simplex Only)
JPO = Plenum Over-Jacket (Duplex Only)
JRD = Riser DFX (Duplex Only)
JR1 = Riser 1.6 mm
JR2 = Riser 2.0 mm
JR3 = Riser 3.0 mm
JR4 = Riser 4.8 mm (Simplex Only)
JR5 = Riser 4.8 mm I/O (Simplex Only)
JRO = Riser Over-Jacket (Duplex Only)
JRS = Riser SBJ 900 µm (Simplex Only)
JV6 = 600 µm Low Smoke PVC
JV9 = 900 µm Low Smoke PVC
W = AllWave FLEX (Yellow Jacket Default)
B = Blue (Blue Tiger & AllWave FLEX Fiber)
Y = Yellow (AllWave FLEX Fiber)
W = White (AllWave FLEX Fiber)
001 = Simplex
002 = Duplex Zip
004 = Quad Round Cordage (1.6 mm Sub Units Riser Only)
LCA = LC Angle Polish (Single Mode Only)
LA4 = LC Angle Polish 40 Degree Boot (Single Mode Only)
LC4 = LC Ultra Polish 40 Degree Boot
LCU = LC Ultra Polish
LCS = LC Ultra Polish Short Boot (1.6 mm & 2.0 mm Only)
LCF = LC Ultra Polish Soft Boot (900 µm Only)
LCD = LC Ultra Polish Single Mode Duplex w/ Clip
SCA = SC Angle Polish (Single Mode Only)
SAS = SC Angle Polish Short Boot (1.6 mm & 2.0 mm Single Mode Only)
SCU = SC Ultra Polish
SCS = SC Ultra Polish Short Boot (1.6 mm & 2.0 mm Only)
SCF = SC Ultra Polish Soft Boot (900 µm Only)
STP = STII+ Ultra Polish Pool Proof (Use with RISER & LSZH)
ST2 = STII Ultra Polish (Use with PLENUM Cordage)
FCA = FC Angle Polish (Single Mode Only)
FCU = FC Ultra Polish
UNC = UNConnectorized (Stub, Pigtail) (End “B” only)
001 – 999
M = Meters (Min. 1 m)
C = Centimeters (Min. 15 cm simplex/45 cm duplex)
F = Feet (Min. 1 ft)
I = Inches (Min. 6 in. simplex/18 in. duplex)
| Chart 1 – Bending loss is a critical parameter in most networks – at the CO/Head End, in cabinets, in closures, and anywhere that fibers may be bent. AllWave FLEX+ ZWP Jumpers will enable low loss performance over the required wavelength range, even under severe bending which can easily occur accidentally in the hundreds of fibers serving a typical distribution area.
As shown to the left, conventional SMF jumpers can sap 1 to 2.5 dB of optical power from a network with just a single 20 mm (0.8”) diameter bend. That can be enough loss to cause network failure, angry customers, and costly network repairs. With AllWave FLEX+ ZWP Jumpers, the loss induced by the same bending is only 0.2 dB to 0.5 dB worst-case, which typically can be absorbed by the design margin of most networks. |
| Chart 2 – In addition to lower bending loss, AllWave FLEX+ ZWP Jumpers lower insertion (connection) loss by up to 0.5 dB compared to CSMF jumpers. Put it all together and you can reduce loss by up to 2.5 dB per jumper using AllWave FLEX+ ZWP Jumpers. |
For additional information please contact your sales representative. You can also visit our website at www.lightera.com or call 1-888-FIBERHELP (1-888-342-3743) USA or 1-770-798-5555 outside the USA. For a full list of our certifications, visit our website.
Lightera reserves the right to make changes to the product(s) described in this document at any time without notice. This document is for informational purposes only and is not intended to modify or supplement any Lightera warranties or specifications relating to any of its products or services.
Compare features, sizes, models to find the perfect option for you
