101 – 200 µm
Part no -
BF06631
ClearLite® Carbon Acrylate 1310 16 NA Optical Fiber
Lightera ClearLite Carbon Acrylate 1310 16 single-mode optical fiber is designed to operate efficiently at both 1310 and 1550 nm. The fiber has a nominal NA of 0.16 and a carbon/dual UV acrylate coating.
This fiber is well-suited for harsh environment installations where fiber compression is a concern and where low-loss, small bend-radius coiling and winding performance is desired.
Lightera ClearLite Carbon Acrylate 1310 16 single-mode optical fiber is designed to operate efficiently at both 1310 and 1550 nm. The fiber has a nominal NA of 0.16 and a carbon/dual UV acrylate coating.
This fiber is well-suited for harsh environment installations where fiber compression is a concern and where low-loss, small bend-radius coiling and winding performance is desired.
Cladding Diameter
Coating Diameter
200 – 300 µm
Coating Type
Carbon/Dual Acrylate
Core Diameter
< 200
Fiber Type
Single-Mode
Numerical Aperture
0.16 – 0.20
Operating Temperature
Standard Temp
Operating Wavelength (nm)
1550 nm
Product Overview
Lightera ClearLite Carbon Acrylate 1310 16 single-mode optical fiber is designed to operate efficiently at both 1310 and 1550 nm. The fiber has a nominal NA of 0.16 and a carbon/dual UV acrylate coating.
This fiber is well-suited for harsh environment installations where fiber compression is a concern and where low-loss, small bend-radius coiling and winding performance is desired.
Typical Applications
- High-Application Stress and Tight-Coil Applications
- High-Humidity Environments
- Long Lifetime Requirements
Product Specifications
| Product Specifications | |
|---|---|
| Product Description | ClearLite Carbon Acrylate 1310 16 NA Optical Fiber |
| Physical Characteristics | |
| Coating Material | Carbon/Dual Acrylate |
| Core Diameter (Nominal) | 6.0 µm |
| Cladding Diameter | 125 ± 2 µm |
| Coating/Buffer Diameter | 250 ± 15 µm |
| Clad Non-Circularity | ≤ 2.0% |
| Core/Clad Offset | ≤ 1.0 µm |
| Optical Characteristics | |
| Type | Single-Mode |
| Operating Wavelength | 1550 nm |
| Cutoff Wavelength | ≤ 1310 nm |
| Mode Field Diameter @ 1310 nm | 6.7 ± 1.0 µm |
| Mode Field Diameter @ 1550 nm | 7.5 ± 1.0 µm |
| Attenuation @ 1310 nm | ≤ 0.75 dB/km |
| Numerical Aperture (Nominal) | 0.16 |
| Mechanical and Environmental | |
| Operating Temperature | -40 to +85 ºC |
| Short-Term Bend Radius | ≥ 4 mm |
| Long-Term Bend Radius | ≥ 4 mm |
| Proof Test Level | ≥ 200 kpsi (1.38 GPa) |
| Order by Part Number | BF06631 |
| Product Description Code | SMB-D1310C/Acry 200 kpsi |
| OPTIONS | Buffer Color, Buffer Material, Buffer Size, Cutoff Wavelength, Metalization, Proof Test, Termination |
Contact Information
For additional information please contact your sales representative. You can also visit our website at www.lightera.com or call 1-888-FIBERHELP (1-888-342-3743) USA or 1-770-798-5555 outside the USA. For a full list of our certifications, visit our website.
Trademark Notice and Disclaimer
Lightera reserves the right to make changes to the product(s) described in this document at any time without notice. This document is for informational purposes only and is not intended to modify or supplement any Lightera warranties or specifications relating to any of its products or services.
Product Overview
Lightera ClearLite Carbon Acrylate 1310 16 single-mode optical fiber is designed to operate efficiently at both 1310 and 1550 nm. The fiber has a nominal NA of 0.16 and a carbon/dual UV acrylate coating.
This fiber is well-suited for harsh environment installations where fiber compression is a concern and where low-loss, small bend-radius coiling and winding performance is desired.
Typical Applications
- High-Application Stress and Tight-Coil Applications
- High-Humidity Environments
- Long Lifetime Requirements
Product Specifications
| Product Specifications | |
|---|---|
| Product Description | ClearLite Carbon Acrylate 1310 16 NA Optical Fiber |
| Physical Characteristics | |
| Coating Material | Carbon/Dual Acrylate |
| Core Diameter (Nominal) | 6.0 µm |
| Cladding Diameter | 125 ± 2 µm |
| Coating/Buffer Diameter | 250 ± 15 µm |
| Clad Non-Circularity | ≤ 2.0% |
| Core/Clad Offset | ≤ 1.0 µm |
| Optical Characteristics | |
| Type | Single-Mode |
| Operating Wavelength | 1550 nm |
| Cutoff Wavelength | ≤ 1310 nm |
| Mode Field Diameter @ 1310 nm | 6.7 ± 1.0 µm |
| Mode Field Diameter @ 1550 nm | 7.5 ± 1.0 µm |
| Attenuation @ 1310 nm | ≤ 0.75 dB/km |
| Numerical Aperture (Nominal) | 0.16 |
| Mechanical and Environmental | |
| Operating Temperature | -40 to +85 ºC |
| Short-Term Bend Radius | ≥ 4 mm |
| Long-Term Bend Radius | ≥ 4 mm |
| Proof Test Level | ≥ 200 kpsi (1.38 GPa) |
| Order by Part Number | BF06631 |
| Product Description Code | SMB-D1310C/Acry 200 kpsi |
| OPTIONS | Buffer Color, Buffer Material, Buffer Size, Cutoff Wavelength, Metalization, Proof Test, Termination |
Contact Information
For additional information please contact your sales representative. You can also visit our website at www.lightera.com or call 1-888-FIBERHELP (1-888-342-3743) USA or 1-770-798-5555 outside the USA. For a full list of our certifications, visit our website.
Trademark Notice and Disclaimer
Lightera reserves the right to make changes to the product(s) described in this document at any time without notice. This document is for informational purposes only and is not intended to modify or supplement any Lightera warranties or specifications relating to any of its products or services.
Compare products and choose the best one
Compare features, sizes, models to find the perfect option for you
