101 – 200 µm
Part no -
BF06160-02
ClearLite® POLY 1310 21 NA Optical Fiber
Lightera ClearLite POLY 1310 21 single-mode optical fiber is designed to operate efficiently at both 1310 and 1550 nm. The fiber has a nominal NA of 0.21 and a polyimide coating.
This fiber is well-suited for harsh environment installations where fiber compression is a concern and where low-loss, small bend-radius coiling and winding performance is desired.
Lightera ClearLite POLY 1310 21 single-mode optical fiber is designed to operate efficiently at both 1310 and 1550 nm. The fiber has a nominal NA of 0.21 and a polyimide coating.
This fiber is well-suited for harsh environment installations where fiber compression is a concern and where low-loss, small bend-radius coiling and winding performance is desired.
Cladding Diameter
Coating Diameter
< 200 µm
Coating Type
Polyimide [PYROCOAT]
Core Diameter
< 200
Fiber Type
Single-Mode
Numerical Aperture
0.21 – 0.25
Operating Temperature
High-Temp
Operating Wavelength (nm)
1550 nm
Product Overview
Lightera ClearLite POLY 1310 21 single-mode optical fiber is designed to operate efficiently at both 1310 and 1550 nm. The fiber has a nominal NA of 0.21 and a polyimide coating.
This fiber is well-suited for harsh environment installations where fiber compression is a concern and where low-loss, small bend-radius coiling and winding performance is desired.
Typical Applications
- High-Temperature Environments
- High-Application-Stress and Tight-Coil Applications
- Oil and Gas Applications
Product Specifications
| Product Specifications | |
|---|---|
| Product Description | ClearLite POLY 1310 21 NA Optical Fiber |
| Physical Characteristics | |
| Coating Material | PYROCOAT® |
| Core Diameter (Nominal) | 4.6 µm |
| Cladding Diameter | 125 ± 2 µm |
| Coating/Buffer Diameter | 155 ± 5 µm |
| Clad Non-Circularity | ≤ 2.0% |
| Core/Clad Offset | ≤ 1.0 µm |
| Optical Characteristics | |
| Type | Single-Mode |
| Operating Wavelength | 1550 nm |
| Cutoff Wavelength | ≤ 1290 nm |
| Mode Field Diameter @ 1310 nm | 5.1 ± 1.0 µm |
| Mode Field Diameter @ 1550 nm | 5.8 ± 1.0 µm |
| Attenuation @ 1310 nm | ≤ 1.2 dB/km |
| Attenuation @ 1550 nm | ≤ 0.9 dB/km |
| Numerical Aperture (Nominal) | 0.21 |
| Mechanical and Environmental | |
| Operating Temperature | -65 to +300 ºC |
| Short-Term Bend Radius | ≥ 10 mm |
| Long-Term Bend Radius | ≥ 17 mm |
| Proof Test Level | ≥ 100 kpsi (0.689 GPa) |
| Order by Part Number | BF06160-02 |
| Product Description Code | SMB-G1310H |
| OPTIONS | Buffer Color, Buffer Material, Buffer Size, Cutoff Wavelength, Metalization, Proof Test, Termination |
| NOTE | Lightera polyimide optical fibers are known to operate in environments up to 300 °C. Performance is application dependent. Contact our Technical Sales department to discuss your specific application requirements. 1-860-678-6636 |
Contact Information
For additional information please contact your sales representative. You can also visit our website at www.lightera.com or call 1-888-FIBERHELP (1-888-342-3743) USA or 1-770-798-5555 outside the USA. For a full list of our certifications, visit our website.
Trademark Notice and Disclaimer
Lightera reserves the right to make changes to the product(s) described in this document at any time without notice. This document is for informational purposes only and is not intended to modify or supplement any Lightera warranties or specifications relating to any of its products or services.
Product Overview
Lightera ClearLite POLY 1310 21 single-mode optical fiber is designed to operate efficiently at both 1310 and 1550 nm. The fiber has a nominal NA of 0.21 and a polyimide coating.
This fiber is well-suited for harsh environment installations where fiber compression is a concern and where low-loss, small bend-radius coiling and winding performance is desired.
Typical Applications
- High-Temperature Environments
- High-Application-Stress and Tight-Coil Applications
- Oil and Gas Applications
Product Specifications
| Product Specifications | |
|---|---|
| Product Description | ClearLite POLY 1310 21 NA Optical Fiber |
| Physical Characteristics | |
| Coating Material | PYROCOAT® |
| Core Diameter (Nominal) | 4.6 µm |
| Cladding Diameter | 125 ± 2 µm |
| Coating/Buffer Diameter | 155 ± 5 µm |
| Clad Non-Circularity | ≤ 2.0% |
| Core/Clad Offset | ≤ 1.0 µm |
| Optical Characteristics | |
| Type | Single-Mode |
| Operating Wavelength | 1550 nm |
| Cutoff Wavelength | ≤ 1290 nm |
| Mode Field Diameter @ 1310 nm | 5.1 ± 1.0 µm |
| Mode Field Diameter @ 1550 nm | 5.8 ± 1.0 µm |
| Attenuation @ 1310 nm | ≤ 1.2 dB/km |
| Attenuation @ 1550 nm | ≤ 0.9 dB/km |
| Numerical Aperture (Nominal) | 0.21 |
| Mechanical and Environmental | |
| Operating Temperature | -65 to +300 ºC |
| Short-Term Bend Radius | ≥ 10 mm |
| Long-Term Bend Radius | ≥ 17 mm |
| Proof Test Level | ≥ 100 kpsi (0.689 GPa) |
| Order by Part Number | BF06160-02 |
| Product Description Code | SMB-G1310H |
| OPTIONS | Buffer Color, Buffer Material, Buffer Size, Cutoff Wavelength, Metalization, Proof Test, Termination |
| NOTE | Lightera polyimide optical fibers are known to operate in environments up to 300 °C. Performance is application dependent. Contact our Technical Sales department to discuss your specific application requirements. 1-860-678-6636 |
Contact Information
For additional information please contact your sales representative. You can also visit our website at www.lightera.com or call 1-888-FIBERHELP (1-888-342-3743) USA or 1-770-798-5555 outside the USA. For a full list of our certifications, visit our website.
Trademark Notice and Disclaimer
Lightera reserves the right to make changes to the product(s) described in this document at any time without notice. This document is for informational purposes only and is not intended to modify or supplement any Lightera warranties or specifications relating to any of its products or services.
Compare products and choose the best one
Compare features, sizes, models to find the perfect option for you
