Home chevron_right Products – Optical Fiber & Connectivity Solutions  chevron_right Fiber Optic Cables chevron_right OPTICAL CABLE CFOI-BLI-UB 24F G-657A2 LSZH GY – EUROCLASS Dca (s2, d2, a1) – (SIMPLUSLAN FTTA)
Descontinuado
Part no - 19850079

OPTICAL CABLE CFOI-BLI-UB 24F G-657A2 LSZH GY – EUROCLASS Dca (s2, d2, a1) – (SIMPLUSLAN FTTA)

All Dielectric Optical Cable recommended for indoor building areas, especially on vertical backbones in FTTA (Fiber To The Apartment) systems for voice, data and imaging traffic Internal installations in conduit and conduit infrastructure.
Consisting of optical units of the micromodule type, with primary acrylate coating. Dielectric wires are placed on the micromodule assembly. On the assembly an outer layer is applied using a non-flame-propagating thermoplastic material.
All Dielectric Optical Cable recommended for indoor building areas, especially on vertical backbones in FTTA (Fiber To The Apartment) systems for voice, data and imaging traffic Internal installations in conduit and conduit infrastructure.
Consisting of optical units of the micromodule type, with primary acrylate coating. Dielectric wires are placed on the micromodule assembly. On the assembly an outer layer is applied using a non-flame-propagating thermoplastic material.
Construção 

Dielétrico;

Micromódulos;

Monomodo.

Descrição 

Cabo óptico totalmente dielétrico, composto por unidades ópticas do tipo micro-módulos, dentro dos quais estão alojadas as fibras ópticas. As fibras ópticas possuem revestimento primário em acrilato. Sobre o conjunto dos micro-módulos estão localizados os elementos de tração de fios dielétricos. Sobre o conjunto é aplicada uma capa externa de material termoplástico não propagante a chama.

Aplicação 

Utilizado como cabo vertical em projetos de fibra óptica.

Ambiente de Instalação 

Interno.

Ambiente de Operação 

Instalações verticais em dutos.

Normas 

  • ABNT NBR 14771: "Cabo Óptico Interno";
  • GR-409: Indoor Fiber Optic Cable;
  • ITU-T G 657: "Characteristics of a bending-loss insensitive single-mode optical fibre and cable";
  • EN 60332-1-2: “Tests on electric and optical fibre cables under fire conditions – Part 1-2: Test for vertical flame propagation for a single insulated wire or cable – Procedure for 1 kW pre-mixed flame”;
  • EN 61034-2: “Measurement of smoke density of cables burning under defined conditions – Part 2: Test procedure and requirements”;
  • EN 50399: "Common test method for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results";
  • EN 50267-2-3: "Common test method for cables under fire conditions. Test on gases evolved during combustion of materials from cables. Procedures. Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity";
  • Padrão EN 50399:
    • Liberação total de calor: ≤ 70 MJ;
    • Pico da taxa de liberação de calor: ≤ 400 kW;
    • Taxa de crescimento de índice de chama: ≤ 1300 W/s;
  • Padrão EN 60332-1-2:
    • Altura: ≤ 425 mm;

Certificações 

Dca (s2, d2, a1).

Fibra Óptica 

BLI (Bending Loss Insensitive) G-657A.

Revestimento Primário da Fibra 

Acrilato.

Identificação da Fibra 

FIBRA:

  1. Azul;
  2. Laranja;
  3. Verde;
  4. Marrom;
  5. Cinza;
  6. Branco;
  7. Vermelho;
  8. Preto.

MICROMODULO:

  1. Azul;
  2. Laranja;
  3. Verde;
  4. Marrom;
  5. Cinza;
  6. Branco;
  7. Vermelho;
  8. Preto.

Unidade Básica 

Micromódulos feitos em LSZH que apresentam grande facilidade de abertura.

Micromódulos 

Até 8 micromódulos.

NÚMERO DE MICROMÓDULOS X NÚMERO DE FIBRAS:

  • 12 fibras: 6 x 2;
  • 24 fibras: 6 x 4;
  • 32 fibras: 8 x 4;
  • 48 fibras: 8 x 6.

Elemento de Tração 

Fios de aramida.

Capa Externa 

Material termoplástico não propagante a chama, com baixa emissão de fumaça e livre de halogênios.

Classe de flamabilidade 

De acordo com IEC 60332-1 e IEC 60332-3 (Cat.D).

Seção Transversal 

1

Dimensionais 

DIÂMETRO EXTERNO (mm):

  • 12 fibras até 48 fibras: 7.6 +/- 0.4.

Massa nominal 

PESO NOMINAL (kg/km):

  • 12 fibras até 32 fibras: 59;
  • 48 fibras: 62.

Raio mínimo de curvatura durante a instalação 

15 x diâmetro do cabo.

Raio mínimo de curvatura durante a operação 

10 x diâmetro do cabo.

Características Mecânicas e Ambientais 

CARGA MÁXIMA DURANTE INSTALAÇÃO:

  • 1000 N.

Temperatura de Instalação (°C) 

0 a 40°C.

Temperatura de Operação (ºC) 

-5 a 60°C

Temperatura de Armazenamento (°C) 

-10 a 70°C.

Gravação 

"FURUKAWA LIGHTERA SIMPLUSLAN  BLI  WF  FTTA  G-657A2  LSZH   MES/ANO EUROCLASS Dca (s2, d2, a1) "Nome do Cliente" LOTE  nL    (**)"

 

Onde:

W                    Número de fibras ópticas

MÊS/ANO        Data de fabricação (MM/AAAA)

Nome do cliente =  Quando solicitado no pedido de compras*

*Após consulta prévia para análise de viabilidiade

nL                    Número do lote de fabricação 

(**)                   Marcação sequencial Métrica        xxxx m

Tipo de Embalagem 

Bobina de madeira.

Comprimento Padrão 

1000 m

2000 m – Sob consulta

Tolerância: +/- 1%

Compare products and choose the best one

Compare features, sizes, models to find the perfect option for you

Compare products

Americas Asia & Oceania Africa Europe Middle East