OPDC Cable
Part no -
16621003
OPTICAL CABLE OPDC-M (24F SM 10,8mm ALUMINUM CLAD STEEL WIRE) 61mm2
| OPDC is used in power distribution network as a messenger, neutral or neutral (auxiliary) cable.
Furukawa Electric, manufactures OPDC cable in Brazil and resells fixing hardware and accessories. This guarantees electrical, mechanical and optical characteristics of the cable and its components |
| OPDC is used in power distribution network as a messenger, neutral or neutral (auxiliary) cable.
Furukawa Electric, manufactures OPDC cable in Brazil and resells fixing hardware and accessories. This guarantees electrical, mechanical and optical characteristics of the cable and its components |
Product Type
Construction
| Stainless steel tube |
| Plastic PBT |
| Aluminum clad steel wires |
Description
OPDC-M cable equivalent to 3×5 AWG consisting of a plastic tube envolved by a stainless steel tube and aluminum clad steel wires 40% IACS.
Application
| Installation Environment | Overhead distribution lines – spans up to 120m |
| Operating Environment | Messenger cable for overhead distribution lines |
Standard
- ABNT NBR 14074
- ABNT NBR 15688
- ITU-T G.652
Constructive Characteristic
| Characteristics | Value |
| Nominal cross section area (mm2) | 61 |
| Center: stainless steel tube – qty. x diameter (mm) | 1 x 3,55 |
| Layer 1: aluminum clad steel wires IACS 40% – qty. x diameter (mm) | 6 x 3,60 |
| Lay direction – outer layer | Left hand |
| Nominal overall diameter (mm) | 10.8 |
| Tensile strength (kgf) | 3,811 |
| Approximate mass (kg/km) | 318 |
| Electrical resistance DC at 20ºC (Ω/km) | 0.71 |
| Módulus of elasticity (N/mm2) | 109,000 |
| Coefficient of linear expansion (1/ºC) | 15.5 x 10-6 |
| Bending radius (mm) | 278.0 |
Optical Fiber
Singlemode(SM) Optical fibers coated by acrylate.
Fiber Identification
| Fiber | Color |
| 1 | Green |
| 2 | Yellow |
| 3 | White |
| 4 | Blue |
| 5 | Red |
| 6 | Violet |
| 7 | Brown |
| 8 | Rose |
| 9 | Natural |
| 10 | Gray |
| 11 | Orange |
| 12 | Aqua |
| 13 a 24 | Same color (1 a 12) with 1 black ring mark |
Cross Section
Optical Characteristics
| Technical Specification | Optical Fiber |
| ET02000 (Annex A – Singlemode Optical Fiber Characteristics) |
ITU-T G.652.D/ |
| Optical Attenuation | 0,36 dB/km at 1310nm 0,22 dB/km at 1550nm |
Compare products and choose the best one
Compare features, sizes, models to find the perfect option for you
