0 – 100 µm
Part no -
36736
Raman Optical Fiber 80 µm
Lightera Raman Fiber 80 µm is specifically designed for applications where a high Raman gain efficiency is required. The fiber is designed with a high index core and a small effective area which yields a high Raman gain efficiency.
With appropriate choice of pump wavelength, the Raman fiber can provide gain at any wavelength from 1100 to 1700 nm. Additionally, it offers bending performance, good splicing properties and low attenuation at the water peak.
Lightera Raman Fiber 80 µm is specifically designed for applications where a high Raman gain efficiency is required. The fiber is designed with a high index core and a small effective area which yields a high Raman gain efficiency.
With appropriate choice of pump wavelength, the Raman fiber can provide gain at any wavelength from 1100 to 1700 nm. Additionally, it offers bending performance, good splicing properties and low attenuation at the water peak.
Cladding Diameter
Coating Diameter
< 200 µm
Fiber Type
Raman
Operating Temperature
Standard Temp
Product Overview
Lightera Raman Fiber 80 µm is specifically designed for applications where a high Raman gain efficiency is required. The fiber is designed with a high index core and a small effective area which yields a high Raman gain efficiency.
With appropriate choice of pump wavelength, the Raman fiber can provide gain at any wavelength from 1100 to 1700 nm. Additionally, it offers bending performance, good splicing properties and low attenuation at the water peak.
Typical Applications
- Discrete Broadband
- Raman Amplifiers
- Raman Lasers
Product Specifications
| Product Specifications | |
|---|---|
| Product Description | Raman Optical Fiber 80 µm |
| Physical Characteristics | |
| Cladding Diameter | 80 ± 1.0 µm |
| Coating Diameter | 165 ± 10 µm |
| Clad Non-Circularity | ≤ 1.0% |
| Core Eccentricity | < 0.6 µm |
| Optical Characteristics | |
| Type | Non-Standard |
| Cutoff Wavelength | ≤ 1050 nm |
| Effective Area @ 1450 nm | 16.1 ± 1.5 µm² |
| Effective Area @ 1550 nm | 18.7 ± 1.5 µm² |
| Attenuation @ 1450 nm (Maximum) | 0.46 dB/km |
| Attenuation @ 1550 nm (Maximum) | 0.36 dB/km |
| Attenuation @ 1450 nm (Typical) | 0.43 dB/km |
| Attenuation @ 1550 nm (Typical) | 0.33 dB/km |
| Polarization Mode Dispersion (PMD) (Typical) | 0.05 ps/km^(0.5) |
| Polarization Mode Dispersion (PMD) (Maximum) | <0.5 ps/km^(0.5) |
| PM or non-PM | Non-PM |
| Peak Raman Gain Efficiency (Typical) | 2.5 (W·km)⁻¹ |
| Mechanical and Environmental | |
| Operating Temperature | -40 to +85 ºC |
| Proof Test Level | ≥ 200 kpsi (1.38 GPa) |
| Order by Part Number | 36736 |
Contact Information
For additional information please contact your sales representative. You can also visit our website at www.lightera.com or call 1-888-FIBERHELP (1-888-342-3743) USA or 1-770-798-5555 outside the USA. For a full list of our certifications, visit our website.
Trademark Notice and Disclaimer
Lightera reserves the right to make changes to the product(s) described in this document at any time without notice. This document is for informational purposes only and is not intended to modify or supplement any Lightera warranties or specifications relating to any of its products or services.
Product Overview
Lightera Raman Fiber 80 µm is specifically designed for applications where a high Raman gain efficiency is required. The fiber is designed with a high index core and a small effective area which yields a high Raman gain efficiency.
With appropriate choice of pump wavelength, the Raman fiber can provide gain at any wavelength from 1100 to 1700 nm. Additionally, it offers bending performance, good splicing properties and low attenuation at the water peak.
Typical Applications
- Discrete Broadband
- Raman Amplifiers
- Raman Lasers
Product Specifications
| Product Specifications | |
|---|---|
| Product Description | Raman Optical Fiber 80 µm |
| Physical Characteristics | |
| Cladding Diameter | 80 ± 1.0 µm |
| Coating Diameter | 165 ± 10 µm |
| Clad Non-Circularity | ≤ 1.0% |
| Core Eccentricity | < 0.6 µm |
| Optical Characteristics | |
| Type | Non-Standard |
| Cutoff Wavelength | ≤ 1050 nm |
| Effective Area @ 1450 nm | 16.1 ± 1.5 µm² |
| Effective Area @ 1550 nm | 18.7 ± 1.5 µm² |
| Attenuation @ 1450 nm (Maximum) | 0.46 dB/km |
| Attenuation @ 1550 nm (Maximum) | 0.36 dB/km |
| Attenuation @ 1450 nm (Typical) | 0.43 dB/km |
| Attenuation @ 1550 nm (Typical) | 0.33 dB/km |
| Polarization Mode Dispersion (PMD) (Typical) | 0.05 ps/km^(0.5) |
| Polarization Mode Dispersion (PMD) (Maximum) | <0.5 ps/km^(0.5) |
| PM or non-PM | Non-PM |
| Peak Raman Gain Efficiency (Typical) | 2.5 (W·km)⁻¹ |
| Mechanical and Environmental | |
| Operating Temperature | -40 to +85 ºC |
| Proof Test Level | ≥ 200 kpsi (1.38 GPa) |
| Order by Part Number | 36736 |
Contact Information
For additional information please contact your sales representative. You can also visit our website at www.lightera.com or call 1-888-FIBERHELP (1-888-342-3743) USA or 1-770-798-5555 outside the USA. For a full list of our certifications, visit our website.
Trademark Notice and Disclaimer
Lightera reserves the right to make changes to the product(s) described in this document at any time without notice. This document is for informational purposes only and is not intended to modify or supplement any Lightera warranties or specifications relating to any of its products or services.
Compare products and choose the best one
Compare features, sizes, models to find the perfect option for you
